Press "Enter" to skip to content


MX5\Miata Coil on plug kit PNP (ready built) 1.6 (NO COILS) NA\NB

In stock
Product Details

MX5 Coil on Plug Kit (Pre-wired)

Are you building a Turbo or Supercharged MX5, if so then our Coil over plug kit is for you!
This kit paired with a standalone ECU like ME221/ME442 or Megasquirt will enable you to run more boost without suffering from spark blow-out which tends to happen on the stock MX5 coil packs. You will also be able to run Sequential fire of the plugs, instead of the wasted spark setup usually ran. These kits are tried and tested on all of our forced induction MX5’s, ranging from 200 to 350BHP
All our kits are Tesa taped and insulated to protect the wiring and your rocker covers.

So what does our kit include (Choose from options):
Coil Pack mounting plate.

Associated mounting hardware

Wired Pig Tails for coil packs.

Ground eyelet for valve cover.

Installation Instructions.

Unlike most kit’s in the UK ours is pre-wired, all you will need to decide on is which fire-mode you want to run, and inform us when ordering. All of our Kits are Plug and Play, so all you need to do is Fit and Drive! Our provided instructions will go through all of this for you, we are also happy to assist in all installs.

We do advise you run an aftermarket ECU that is able to run these types of coils, it is possible for the stock ECU to run them but you will need to reduce the dwell time. On aftermarket ECU’s be sure to lower your Dwell to 2.5ms at 12v.

Save this product for later